Skip to main content
Who Pays for Water, Sewer, and Garbage in a Chicago Rental Property?

Who Pays for Water, Sewer, and Garbage in a Chicago Rental Property?

Owning a rental property in Chicago comes with expenses that are easy to overlook, especially when tenants are responsible for their own gas and electricity. Water, sewer, and garbage charges are often a different story. For owners of Chicago two-flats, three-flats, and four-flats, these expenses can add up quickly and have a meaningful impact on the property's operating budget.

In Chicago, property owners remain responsible to the city for municipal water charges, even when a lease requires tenants to reimburse them. Sewer charges are calculated based on water charges, while garbage collection fees depend on the number of eligible dwelling units. Understanding how these expenses work is important whether you are purchasing your first investment property, reviewing an existing lease, or trying to improve the financial performance of a rental building.

Who Is Responsible for Water Bills in Chicago Rental Properties?

Under Section 11-12-330 of the Municipal Code of Chicago, property owners are responsible for water service charges associated with their properties. A lease may establish an agreement between a landlord and tenant about who will ultimately pay certain expenses, but that agreement does not eliminate the owner's responsibility to the city.

This distinction matters because municipal billing responsibility and lease obligations are not necessarily the same. An owner might require a tenant to reimburse water expenses under a legally compliant lease arrangement, but the owner should still monitor the municipal account and ensure payments are made.

Consider a landlord who owns a Chicago two-flat where both apartments share one water meter. Even if the leases include provisions addressing water expenses, the city does not simply treat the two tenants as separate customers responsible for their individual consumption. The owner must understand how the building is billed and how those costs will be handled.

For many smaller multifamily properties, including water and sewer expenses in the operating budget is a practical approach. However, the appropriate arrangement depends on the building's metering, the rental agreement, and applicable law.

How Much Does Water and Sewer Cost in Chicago in 2026?

Chicago's water rates are adjusted annually according to the city's published rate structure. Effective June 1, 2026, the metered water rate is $37.18 per 1,000 cubic feet, or approximately $4.98 per 1,000 gallons.

The city also calculates sewer charges at 100% of the water charge. That means owners evaluating utility expenses need to account for both charges rather than looking at water consumption alone.

For example, a property using 10,000 gallons of water during a billing period would incur approximately $49.80 in water charges and another $49.80 in sewer charges. The combined water and sewer expense would be approximately $99.60 before other applicable charges.

This is an illustrative calculation based on the city's published rate, not an estimate of typical consumption for a Chicago rental property. Actual expenses depend on usage, the billing arrangement, and other applicable charges.

The important takeaway for landlords is that a water expense can represent only part of the total municipal utility cost. When reviewing a property's operating history, owners should examine the complete bill rather than relying on a single line item.

Who Pays for Garbage Collection in Chicago Rental Properties?

Chicago's Department of Streets and Sanitation provides municipal garbage collection to eligible residential properties containing one through four dwelling units. The city's published garbage collection fee is $9.50 per dwelling unit per month, and it appears on the unified utility bill along with water and sewer charges.

For an eligible single-family rental, that equals $9.50 per month. A two-flat is billed $19 per month, a three-flat $28.50, and a four-flat $38. These charges are based on the number of dwelling units receiving municipal service, rather than the number of tenants currently occupying the property.

Larger residential buildings generally do not qualify for Chicago's standard municipal garbage collection program and must arrange for private waste collection. Those arrangements can involve different costs depending on container size, pickup frequency, service requirements, and the private provider.

For investors comparing smaller multifamily buildings with larger apartment properties, garbage collection is one operating expense that can change significantly depending on the building.

Can Chicago landlords charge tenants separately for garbage?

Whether a landlord can recover garbage expenses from tenants depends on the lease, the billing arrangement, and applicable law. Owners should not assume that a municipal fee can automatically be added to an existing tenant's monthly obligations.

Any separate charge should be clearly documented and reviewed for compliance before implementation. For landlords who prefer simpler billing, accounting for garbage expenses when establishing rent may be more practical than collecting separate payments.

Why Utility Expenses Are Especially Important for Chicago Two-Flats, Three-Flats, and Four-Flats

Chicago's older multifamily buildings frequently have shared infrastructure that makes utility expenses more complicated than they initially appear. A two-flat may have separate electric meters but a shared water meter, while a three-flat could have a common hot-water system or shared heating equipment.

These arrangements affect more than monthly billing. They can influence maintenance costs, lease administration, and the property's overall profitability.

Suppose an investor purchases a three-flat where each apartment has its own gas and electric service, but the owner remains responsible for water, sewer, garbage, and common-area electricity. If those expenses were overlooked when evaluating the investment, the property's actual net operating income could be lower than expected.

This is why utility due diligence should be part of the purchasing process. Before acquiring a Chicago rental property, investors should request available utility bills, identify which systems are shared, review existing lease provisions, and confirm whether the building has any outstanding municipal balances.

Understanding these expenses before closing can help owners avoid surprises and establish more realistic operating budgets.

What Do Utility Expenses Look Like for a Chicago Three-Flat?

A simple example illustrates how municipal charges can affect a building's annual operating expenses.

Assume an eligible Chicago three-flat uses an average of 30,000 gallons of metered water per month. Using the city's June 2026 approximate water rate, the water charge would be $149.40 per month. Sewer charges at 100% would add another $149.40, while the published municipal garbage fee would contribute $28.50.

Expense

Monthly

Annual

Water

$149.40

$1,792.80

Sewer

$149.40

$1,792.80

Garbage

$28.50

$342.00

Combined total

$327.30

$3,927.60

This hypothetical example assumes consistent consumption throughout the year and excludes other applicable fees and charges. It is not a typical-use estimate or an actual Landmark-managed property.

For an investor, nearly $4,000 in annual expenses is a meaningful amount to include in the property's financial analysis. The exact figure will differ by building, but the example demonstrates why water, sewer, and garbage should not be treated as insignificant miscellaneous costs.

It also highlights the importance of reviewing actual billing history rather than relying on assumptions about what a building should cost to operate.

Can Chicago Landlords Divide Shared Utility Bills Between Tenants?

Shared utility billing requires careful attention because Illinois law addresses certain arrangements involving utility services supplied to rental properties. The Illinois Rental Property Utility Service Act includes requirements concerning billing disclosures, shared services, and tenant protections.

An owner should not assume that dividing a water bill equally among apartments is automatically lawful. The appropriate method depends on the utility, the physical system, the proposed billing arrangement, and applicable requirements.

For example, a three-flat with one water meter cannot determine each apartment's actual water consumption from the building's total meter reading alone. If the owner wants tenants to reimburse a portion of the expense, the arrangement should be evaluated before charges are imposed.

Owners considering separate utility charges should have their lease language and billing practices reviewed by a qualified Illinois attorney. This is particularly important when changing the terms of an existing tenancy.

How Can Landlords Identify Unexpected Utility Expenses?

A sudden increase in a Chicago rental property's water bill may indicate a change in occupancy or consumption, but it can also point to a maintenance issue. A continuously running toilet, leaking fixture, or concealed plumbing problem can increase usage, especially when several apartments share the same meter.

Owners should compare current bills with historical consumption rather than reviewing only the total amount due. If usage rises without an obvious explanation, investigating the property's plumbing systems may prevent additional expenses.

It is also worth checking that municipal bills reflect the correct property information. Chicago's garbage-fee guidance provides a process for addressing an incorrect dwelling-unit count, which can affect the amount charged.

For owners who live outside Chicago or manage multiple properties, consistent monitoring becomes particularly important. A billing discrepancy or maintenance issue can continue for several months if no one is regularly reviewing the accounts.

What Happens if a Landlord Fails to Pay a Required Utility Bill?

Unpaid utility charges can create financial complications and potentially affect essential services at an occupied rental property. Illinois law provides protections for tenants when landlords fail to maintain utility services for which they are responsible.

Landlords must also avoid using utility interruptions as a method of pressuring tenants to pay overdue rent or leave a property. A rent dispute must be addressed through lawful procedures rather than withholding essential services.

The best way to avoid these problems is to establish clear responsibilities, monitor accounts, and address billing issues before they become serious. For owners managing several units, utility administration should be treated as part of routine property management rather than an occasional accounting task.

Should Chicago Landlords Include Utilities in the Rent?

There is no universal answer because the most practical arrangement depends on the property. Including water and sewer in the rent may simplify billing for a building with shared meters, but it also means the owner absorbs changes in consumption and municipal rates.

Separately metered services may be easier for tenants to maintain directly, while shared services require additional consideration. Owners should evaluate the building's existing infrastructure, rental market, lease terms, and long-term operating costs before deciding how expenses will be handled.

The most important factor is consistency between the property's actual costs and the financial assumptions used to set rent. A landlord who understands the building's expenses is better positioned to evaluate profitability and make informed decisions about future improvements.

Frequently Asked Questions About Chicago Rental Utilities

Does the landlord or tenant pay the water bill in Chicago?

Chicago property owners remain responsible to the city for municipal water charges. A lease may establish certain reimbursement obligations between the owner and tenant, subject to applicable law, but those provisions do not eliminate municipal liability.

Is sewer included in Chicago's water bill?

Chicago sewer charges appear separately on the unified utility bill and are calculated at 100% of the water charge. Owners should account for both expenses when evaluating the property's operating costs.

How much is garbage collection for a Chicago two-flat?

The city's published fee for an eligible two-unit residential building is $19 per month, based on $9.50 per dwelling unit. Owners should verify the amount shown on their current utility bills.

Can landlords split one water bill between several apartments?

Owners should not assume that dividing a shared bill equally among tenants is automatically compliant. The proposed billing method and lease provisions should be reviewed under applicable Illinois law before implementation.

Better Utility Management Starts With Understanding Your Property

Water, sewer, and garbage expenses may seem straightforward, but Chicago rental properties often have billing arrangements and shared systems that require closer attention. Understanding those responsibilities can help owners create more accurate budgets, avoid unnecessary disputes, and identify maintenance issues before they become more expensive.

At Landmark Property Management, we help rental property owners throughout Chicago and the surrounding suburbs manage leases, coordinate maintenance, and monitor property operations. Whether you own a Chicago two-flat, a three-flat, or a larger investment property, having a clear understanding of your operating expenses is an important part of protecting your investment.

If you are looking for professional help managing your Chicago rental property, contact Landmark Property Management at 312.809.5029 or visit Landmark Property Management to schedule a consultation.

This article provides general information and is not legal or financial advice. Utility billing arrangements, lease provisions, and municipal requirements should be evaluated for each individual property.



back